This is the 15th year of continuous daily publication for 365Caws. All things considered, it's likely it will be the last year as it is becoming increasingly difficult for me to find interesting material. However, I hope that I may have inspired someone to a greater curiosity about the natural world with my natural history posts, or encouraged a novice weaver or needleworker. If so, I've done what I set out to do.
Monday, June 15, 2020
The Tail Project
Day 246: One drawback to weaving is that there is always a certain amount...sometimes quite a bit...of "loom waste," the section of warp between the heddles and the back beam. When calculating yardage requirements for a project, the weaver factors in an amount appropriate to that distance and the loom being employed. Different types of loom will have more or less waste depending on their design, so sometimes it's possible to take the waste from one loom and use it on another, or to use it as weft for narrow stripes. Oh, hang on! I've gotten ahead of myself with this story. You're probably wondering where this loom came from, aren't you? Yes, it's "new" (to me, anyway), given to me by a member of our Morris-dance side, and looking very much like a pile of kindling at the time I picked it up. The brochure she gave me to go with it was rather unhelpful. It wasn't that it was written in German; I could stagger through that. It was that it didn't show any model which went together with the parts I had laid out all over my living room floor. Several visits to Mr. Google later, I had a handful of blurry photographs which showed at least some of the parts (not always in the same places) and a model number, Kircher-Rahmen WU80. Don't even ask. YouTube was no help at all.
As the afternoon wore on, I discovered that the "pile of kindling" actually contained two looms, the Kircher and a tapestry frame, the parts of which could not be made to relate to the tapestry adaptation for the WU80. So...I got two looms for the price of one (free!), and two smaller rigid heddle looms (one missing a handle) thrown into the bargain. I'm still not sure I have all the parts in the right places, but what the heck, it's a loom. The heddles go up, the heddles go down, threads can be secured to the beams. That's really all any loom needs to do.
And that brings us now to the Tail Project, i.e., what to do with all those five-foot long bits of warp from my floor loom. I had to pull in some other yarns from my stash, but was eventually able to formulate a plan for a striped lap throw which will be fringed on all four sides, substantially reducing the number of bags of loom waste occupying my crafts room. As my grandma used to say, "Use it up, wear it out, make it do or do without." Weavers, take note. Those tails are good for something. Save them until you have enough.
Labels:
frame loom,
Janet,
Kircher WU80 loom,
loom waste,
rigid heddle,
Tail Project
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment