Day 160: Halfway through the complicated threading of "Norse Kitchen," I became aware that something was grievously wrong. I had counted heddles carefully, but I was coming up short for those on two shafts. I looked at the draft I'd printed out, and compared it to my calculations. They did not agree on the number of repeats in the center section. After much study, I discovered a second mistake. It was time for a major rewrite, and it had to be one which would allow me to use the warp I had already measured and rolled onto the loom. I took a "sanity break" before sitting down with the calculator, and once I'd made the adjustments, I saw that I was going to have to add nine more warp threads on each side. Now how was I going to do that? It meant I'd have to pull the four-yard warp off the loom, and I certainly didn't want to leave it in a pile on the floor, so I wound it onto my 16-inch rigid heddle loom. Merry got a little too helpful during the next phase and had to be locked in the bathroom for the duration, but by dinnertime, I had the warp wound back onto Schacht. If the Gods of Weaving are benevolent, they will reward me for my diligence today with a smooth and error-free threading process.
No comments:
Post a Comment